We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Switcher related equipment.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Switcher related equipment - List of Manufacturers, Suppliers, Companies and Products

Switcher related equipment Product List

1~15 item / All 19 items

Displayed results

Routing switcher-related equipment 'DSR1808'

Alarm information will be output via LED display, contacts from the back of the unit, and LAN!

The "DSR1808" is an 8x8 digital serial routing switcher that supports HD/SD-SDI signals as well as DVB-ASI signals. It has 8 channels for input and 8 channels for output, and it switches in synchronization with the reference signal. The reference signal can accept either NTSC black burst signals or high-definition three-value sync signals. 【Features】 ■ The signal formats comply with the bit-serial interface standards of SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI). ■ External control is possible via serial (RS232C/RS422), ETHERNET, ARCNET LAN, and parallel control. ■ A manual panel is standardly implemented on the front of the device, allowing for local control of the router independently. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment 'DSR9030'

Due to the short depth, it is possible to mount it on the back side of the rack! Serial control is set at the factory.

The "DSR9030" is a 32x32 digital serial routing switcher compatible with 3G/HD/SD-SDI signals. Due to its short depth, it can be mounted at the back of a rack. Additionally, alarms are output via LED display and contact Ethernet from the rear of the unit. The power supply is configured with redundancy, ensuring that operations are not disrupted even if one power supply fails. 【Features】 - The signal formats comply with SMPTE 424 (3G), SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI) bit-serial interface standards. - It has 32 channels for input and 32 channels for output, switching during the V blanking period of the reference signal. - The reference signal can accept either an NTSC black burst signal or a high-definition three-value sync signal. *For more details, please refer to the PDF documentation or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment 'DSR9040'

Supports 3G/HD/SD-SDI signals! Due to its short depth, it can be mounted at the back of the rack.

The "DSR9040" is a 72x72 digital serial routing switcher compatible with 3G/HD/SD-SDI signals. The signal formats comply with the SMPTE 424 (3G), SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI) bit-serial interface standards. When using this product, it is essential to supply power from the "PSU1100." 【Features】 ■ Short depth allows for mounting at the back of a rack ■ Alarms are indicated by LED display and output contacts from the rear of the unit ■ External control can be done via serial control (RS232C/RS422) or Ethernet ■ Serial control is set at the factory ■ Compatible with 3G/HD/SD-SDI signals *For more details, please refer to the PDF documentation or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher related equipment 'DSR9376A'

The maximum input line is 8 channels! Input phase pulling for 5H buffer and 1H buffer can be performed.

The "DSR9376A" is a routing switcher designed for switching HD-SDI and 3G-SDI signals, equipped with AVDL. It has a maximum of 8 input channels and 4 output channels, and switching is performed in synchronization with the reference signal. The power supply unit is configured in a redundant setup, ensuring that operations are not affected even if one power supply unit fails. 【Features】 ■ Input phase pulling for 5H buffer and 1H buffer is possible ■ Maximum of 8 input channels and 4 output channels ■ Switching is performed in synchronization with the reference signal ■ Power supply unit is configured in a redundant setup ■ Operations are not affected even if one power supply unit fails *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment "RCP300A"

You can change the button assignment for output and input according to your usage!

The "RCP300A" is a routing switcher control panel with 8 fixed buttons. Depending on the application, the assignment of output and input buttons can be changed. Additionally, control can be selected from serial control (RS232C), ARCNET, or Ethernet. By pressing the INH button, you can disable selection via the panel. 【Features】 ■ The assignment of output and input buttons can be changed depending on the application. ■ Control can be selected from serial control (RS232C), ARCNET, or Ethernet. ■ Pressing the INH button allows you to disable selection via the panel. *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment 'RCP310A'

Control can be selected from serial control (RS232C), ARCNET, or Ethernet!

The RCP310A is a routing switcher control panel with 16 fixed buttons. The power input is DC12V ±10%, and the power consumption is below DC12V 0.2A. Control can be selected from serial control (RS232C), ARCNET, or Ethernet. Depending on the application, the button assignments for output and input can be changed. 【Features】 ■ The INH button can be pressed to prohibit selection via the panel. ■ Control can be selected from serial control (RS232C), ARCNET, or Ethernet. - RS232C/RS422: 9600/38400bps (internal switching) D-SUB 9P female - ETHERNET: 10Base-T/100Base-TX 10Mbps/100Mbps RJ-45 - ARCNET: 75Ω BNC RS485 2.5Mbps/10Mbps * For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment "RCP2301"

You can search for control target input/output materials using either the up/down switch or the 10-key!

The "RCP2301" is a remote panel that switches the crosspoints of the MTX switcher in a control system built on ARCNET/ETHERNET. It allows the selection of one output from all output rows for each input row. The search for control target input/output materials can be operated using either the up/down switches or the 10-key. 【Features】 ■ Allows the selection of one output from all output rows for each input row ■ The search for control target input/output materials can be operated using either the up/down switches or the 10-key ■ Input materials can be assigned to the crosspoint switching buttons ■ Control system built on ARCNET/ETHERNET ■ Display of device names *For more details, please refer to the PDF materials or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment "RCP3000A"

Control of up to 4 buses is possible! In addition to settings on the main unit, configuration can also be done from a PC.

The "RCP3000A" is an 8-button assign panel that switches the crosspoints of an MTX switcher in a control system built on ARCNET/ETHERNET. It can control up to 4 buses and is equipped with an LCD that can display material names and other information with a maximum of 8 characters. Assignments can be configured not only on the unit itself but also from a PC. 【Features】 ■ Capable of controlling up to 4 buses ■ Equipped with an LCD that can display material names and other information with a maximum of 8 characters ■ Assignments can be configured both on the unit and from a PC ■ The INH button can be pressed to prohibit selection via the panel *For more details, please refer to the PDF documentation or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment 'RCP3600A'

Control of up to 32 buses is possible! By pressing the INH button, you can disable selection via the panel.

The "RCP3600A" is an assignment panel that switches the crosspoints of the MTX switcher in a control system built on ARCNET/ETHERNET. Bus control is possible with the upper buttons, and material switching can be done with the lower buttons. It can control up to 32 buses. Additionally, by pressing the INH button, selection via the panel can be prohibited. 【Features】 ■ Bus control with the upper buttons and material switching with the lower buttons ■ Control of up to 32 buses ■ Equipped with an LCD that can display material names and other information up to 8 characters ■ Assignments can be set not only on the main unit but also from a PC *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment 'RCP3700A'

It is possible to assign any material and control bus to 16 buttons! It is equipped with an LCD that can display material names and other information with a maximum of 8 characters.

The "RCP3700A" is an assign panel that switches the crosspoints of the MTX switcher in a control system built with ARCNET/ETHERNET. Its dimensions are W:425(482)mm H:43.7mm D:80mm, and it allows for the assignment of any material and control bus to 16 buttons. Additionally, it is equipped with an LCD that can display up to 8 characters for material names, etc. 【Features】 ■ Allows assignment of any material and control bus to 16 buttons ■ Assignments can be set not only on the main unit but also via PC ■ The INH button can be pressed to prohibit selection via the panel ■ Display of device names ■ AC/DC adapter *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher related equipment 'ALH101M'

Introducing a 4-port HUB device with a built-in PLL circuit that supports ARC NET LAN!

The "ALH101M" is a 4-port HUB device compatible with ARC NET LAN that can be installed with four units in a 1U rack mount. The communication speed (2.5Mbps/10Mbps) can be set using JP1 and JP2. Since the HUB controller has a built-in PLL circuit, it provides LAN signals with minimal jitter accumulation due to an increase in the number of nodes. 【Features】 ■ The HUB controller has a built-in PLL circuit, allowing for LAN signals with minimal jitter accumulation due to an increase in the number of nodes. ■ The communication speed (2.5Mbps/10Mbps) can be set using JP1 and JP2. ■ ARCNET distribution. ■ 1U 1/4 size. ■ AC/DC adapter. *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment "DSR9300"

The reference signal can accept either NTSC black burst signals or high-definition three-value synchronization signals!

The "DSR9300" is a 4x4 digital serial routing switcher that supports HD/SD-SDI signals as well as DVB-ASI signals. The signal formats comply with the bit-serial interface standards of SMPTE 292M (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI). It has 4 channels for input and 4 channels for output, and it switches during the V blanking period of the reference signal. 【Features】 ■ The reference signal can accept either NTSC black burst signals or high-definition three-value sync signals. ■ External control is possible via serial control (RS232C/RS422) or Ethernet. ■ Serial control is set at the factory. ■ A manual panel is standardly implemented on the front of the device. ■ Local control of the routing switcher can be performed independently. *For more details, please refer to the PDF documentation or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher related equipment "DSR2616"

The power supply unit is configured with redundancy! Even if an abnormality occurs in one of the power supply units, it will not interfere with operations.

The DSR2616 is a 16x16 digital serial routing switcher that supports HD/SD-SDI signals as well as DVB-ASI signals. External control can be performed via serial control (RS232C/RS422), ETHERNET, ARCNET LAN, or parallel control. The signal formats comply with the BTA S-004B (HD), SMPTE 259M-C (SD), and EN50083-9 (DVB-ASI) bit-serial interface standards. 【Features】 - It has 16 channels for input and 16 channels for output, switching in sync with the reference signal. - The reference signal can accept either NTSC black burst signals or high-definition three-value sync signals. - A manual panel is standardly implemented on the front of the device. - Local control of the router can be performed independently. - The power supply unit has a redundant configuration. *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment "DSR9360"

The signal format conforms to the bit-serial interface standards of 3G-SDI, HD-SDI, SD-SDI, and DVB-ASI!

The "DSR9360" is a 256x256 digital video routing switcher that switches SDI video signals. Each INPUT/OUTPUT unit consists of 16 inputs and 16 outputs, and with a maximum of 16 additional units, a 256x256 matrix configuration is possible. Preset settings during system operation can be easily configured using a PC application. 【Features】 ■ Setting for prohibited input materials ■ Configuration of switcher switching points ■ Configurable for each output bus ■ Alarm monitoring available via NMP ■ Equipped with contact output alarms *For more details, please refer to the PDF materials or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Routing switcher-related equipment "RCP320A"

By pressing the INH button, you can disable selection via the panel! 32-button remote control panel.

The "RCP320A" is a routing switcher control panel with 32 fixed buttons. The dimensions are W: 431.4 (482) mm H: 39.7 mm D: 98.7 mm (excluding protrusions). The button assignments for output and input can be changed according to usage. Additionally, control can be selected from serial control (RS232C), ARCNET, or Ethernet. 【Features】 ■ Ethernet control ■ ARCNET control ■ AC/DC adapter ■ Ability to change button assignments for output and input according to usage ■ The INH button can be pressed to prohibit selection via the panel *For more details, please refer to the PDF document or feel free to contact us.

  • Other image-related equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration